![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378100.webp)
6
COMMISSIONING
100
8026365/V1-0/2022-03|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Subject to change without notice
Click
OK
to confirm. The device drivers are installed. The LiDAR sensor will now be
detected by the configuration PC.
▸
In the device tile, click the pen icon next to the IP address.
▸
In the
TCP/IP settings
window, select the
Use the following IP settings
option and
define the IP address that is to be used to access the LiDAR sensor in the sensor
network.
Click
OK
to confirm the entry. The altered IP address is displayed in the device tile.
NOTE!
If the configuration PC and the LiDAR sensor are still in the same number range,
the connection to the altered IP address of the LiDAR sensor can be established
directly.
Changing the
IP address