![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378051.webp)
SYSTEM DESCRIPTION
3
51
8026365/V1-0/2022-03|SICK
Subject to change without notice
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
When the VMS5200-x MID is operated on double belt sorters in singulated mode with
dynamic scale value switchover, the values for the two selected scale intervals must be
described in two separate system information labels and attached to the system indelibly.
For scale interval value 1, the
Conveyor=double belt
,
Mode double belt=singulated
and
Scale value=dynamic
options on the system information label should be marked. The
dimension values with unit of measurement (
mm
or
inch
) must be specified in indelible
ink.
When specifying scale interval value 2, the
single belt/double belt: singulated
system
information label must also be used and the
dynamic
operating mode marked. The
dimension values for scale interval value 2 with unit of measurement (
mm
or
inch
) must
be specified in indelible ink.
The type labels for the two LMS4x21 LiDAR sensors as well as for the SIM2000-2 Prime
controller must be affixed to the corresponding fields of the metrology information label.
Fig. 46: Information labels for the VMS5200-x MID on double belt sorters in singulated mode
with dynamic scale value switchover and with affixed type labels
Legend
1
System information label for scale interval value 1 when working
with double belt sorters in singulated mode with dynamic scale value
switchover
2
System information label for scale interval value 2
3
Metrology information label with affixed type labels
Double belt sorter in
singulated mode with
dynamic scale value
switchover