![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378020.webp)
3
SYSTEM DESCRIPTION
20
8026365/V1-0/2022-03|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Subject to change without notice
•
Central voltage supply for all system components.
•
Coordinates all connected sensors and processes the measured values received.
•
The SIM2000-2 Prime controller uses the signals from the photoelectric sensor array to
calculate the incremental signal for position determination. The signals are transmitted
to the LMS4x21 master.
•
The SIM2000-2 Prime controller receives the measuring points from the LiDAR sensors
and uses the 2D sections to calculate a three-dimensional model.
•
Determines the box volume and dimensional values based on the calculated 3D model.
•
The data is sent to the higher-level customer system via the SIM200-2 Prime controller
in a host telegram with a defined format.
NOTE!
In the case of the VMS5200-x MID, the measurement results are saved in the
SIM2000-2 Prime controller alibi memory, which is required for legal-for-trade
verification.
3.2.5
Cross belt conveyor elements
Fig. 8: Single cross belt sorter with cross-belt conveyor elements
Legend
1
Carrier
2
Cross-belt conveyor element
3
Transported item
•
The conveyor belt is divided into individual cross-belt conveyor elements that are
mounted on a carrier.
•
Similar to a conventional conveyor belt, the individual cross-belt conveyor elements are
moved in a contiguous line in the conveying direction.
•
The cross-belt conveyor elements can also be loaded and unloaded perpendicularly to
the conveying direction via their integrated conveyors.
•
Loads are loaded onto cross-belt conveyor elements by coordinated placement on the
individual carrier units.
Function
Single cross
belt sorter