![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378106.webp)
7
MAINTENANCE AND REPAIR
106
8026365/V1-0/2022-03|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
Subject to change without notice
7.1
Monitoring and cleaning work
7.1.1
Control measurements
▸
Ensure proper functioning of the multi-dimensional measurement system by means
of regular controls.
▸
To do so, check the measurement accuracy of the multi-dimensional measurement
system using defined test objects.
▸
If any unexpected deviations are found, check the multi-dimensional measurement
system for mechanical damage.
▸
Should the multi-dimensional measurement system show signs of mechanical damage,
contact SICK Service.
▸
Place the reference object
in a centered position
on a conveyor element.
NOTE!
The LiDAR sensors need to be able to detect the entire reference object when it
passes the laser line.
▸
Make sure that the reference object does not change its spatial position when passing
the laser line.
7.1.2
Visual inspection
▸
Regularly check the conveying equipment for damage or contamination.
▸
Replace any damaged belt elements immediately.
▸
Check the electrical installation regularly.
▸
Make sure that all cable connections are secure.
▸
Replace any damaged connecting cables immediately.
Operational check
of the volume
measurement
Visual inspection
of the conveying
equipment
Visual inspection
of the cables