![background image](http://html.mh-extra.com/html/sick/vms4200/vms4200_addendum-to-operating-instructions_1264378031.webp)
SYSTEM DESCRIPTION
3
31
8026365/V1-0/2022-03|SICK
Subject to change without notice
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | VMS4200-x/5200-x MID
3.4.2
Overhang tolerance for single belt systems
Fig. 20: Example 1 of overhang calculation for single belt systems
•
All objects are located within the measuring range for the overhang calculation.
•
The measurement accuracy for all cubic and irregularly shaped objects in this example
is 5 mm x 5 mm x 5 mm (0.2" x 0.2" x 0.2").
Fig. 21: Example 2 of overhang calculation for single belt systems
•
Object 2 is projecting into the measuring range of object 3 and is therefore outside the
measuring range.
•
Two objects are detected in the measuring range of object 3.
•
Object 2 and object 3 deliver invalid measurement results.
•
The measurement accuracy of the other objects is 5 mm x 5 mm x 5 mm (0.2" x 0.2" x
0.2").
Example 1
Example 2