MAINTENANCE
7
163
8017768/12AX/2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | TIC
7.3.2
Replace the TIC102
A defective TIC102 can only be replaced in its entirety.
Part number
Description
1055102
TIC102 master
1055104
TIC102 slave
Replacing the device
1. Loosen the M12 round connectors from the TIC102 connections and remove the
connecting cables.
2. Dismantle the defective TIC102 from the mounting.
3. Mount the replacement device.
4. Connect the cables to the connections of the new TIC102 and screw the plug
connectors together.
▸
Update the measurement site. Additional information can be found in chapter
7.3.3
Completely replacing the TIC502
A defective TIC502 can be replaced in its entirety.
Part number
Description
1085137
TIC502 master
1085138
TIC502 slave
Replacing the device
1. Loosen the M12 round connectors from the 2D LiDAR sensors and remove the
connecting cables.
2. Dismantle the defective TIC502 from the mounting.
3. Mount the replacement device.
4. Connect the cables to the new 2D LiDAR sensor and screw together the plug
connectors.
▸
Update the measurement site. Additional information can be found in chapter
Note
Note