![background image](http://html.mh-extra.com/html/sick/lms511-se/lms511-se_operating-instructions-manual_1264310129.webp)
COMMISSIONING
6
129
8017768/12AX/2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | TIC
6.7.1
Checking operational readiness
If all the system components in the live view are
green
once the configuration has been
successfully started, they are ready for operation. In the navigation tree, the operational
readiness of the system functions and system components is indicated by a
green
square
. A gray icon signals that a device status is currently unknown.
When the configuration starts, the sensor components remain red until a connection has
been established. Depending on the network connectivity, this may take up to two
minutes.
If a sensor component remains permanently
red
, it could be that an incorrect IP address
has been assigned to it. The problem could also be caused by a missing or inadequate
voltage supply or poor network connectivity.
Additional information on fault detection can be found in chapter
Note