![background image](http://html.mh-extra.com/html/sick/lms511-se/lms511-se_operating-instructions-manual_1264310016.webp)
2
ON SAFETY
16
8017768/12AX/2019-05-31|SICK
O P E R A T I N G I N S T R U C T I O N S | TIC
Subject to change without notice
NOTE
Claims under the warranty rendered void
The housings of the devices must not be opened. The devices are sealed.
If the device is opened, any warranty claims against SICK AG will be void.
WARNING
Risk resulting from faults
Cease operation if the cause of the malfunction has not been clearly identified!
▸
Immediately stop system operation if you cannot clearly identify the fault and if you
cannot safely remedy the problem.
2.5
Protecting the environment
The profiling system has been designed to minimize its impact on the environment. It
consumes very little energy.
Always act in an environmentally responsible manner at work. For this reason, please note
the following information on disposal.
Disposal after final decommissioning
▸
Always dispose of unusable or irreparable devices in accordance with the applicable
waste disposal regulations specific to your country.
▸
Remove the plastic parts and recycle the aluminum housing of the 2D LiDAR sensor.
▸
Dispose of all electronic assemblies as hazardous waste. The electronic assemblies
can be easily removed.
SICK AG does not take back devices that are unusable or irreparable.
Note