SICK LMS511 SE Operating Instructions Manual Download Page 149

Page: 149 / 216

COMMISSIONING

149

8017768/12AX/2019-05-31|SICK

Subject to change without notice

O P E R A T I N G I N S T R U C T I O N S | TIC

6.10.2

Updating the TEMS Recorder

Patches and service packs for the TEMS Recorder are supplied in the

temsUpdate

file

format and installed via TEMS Manager.
The configuration that is currently running has to be stopped for this.

Getting started

1.  Save the update file in a directory of your choice on the customer network.
2.  Start TEMS Manager from a client computer.
  The client computer must be able to access the directory containing the update file.
3.  Go to the

Setup

workspace and click

Firmware Update

When logging in, the user must have

Service

authorization. If you are not yet logged in

at this level, please do so now (for more information, see appendix at

9.5 Users and

authorizations

Performing an update

1. Click the

Browse

button and select the update file.

First of all, the file is copied to the Traffic Controller.
2. Once it has been copied across, the update version number and description are

displayed.

Note

Summary of Contents for LMS511 SE

























































































































































































































Search results

Summary of Contents for LMS511 SE

Reviews:

Related manuals for LMS511 SE

Brands by name

Popular brands

SICK LMS511 SE, Operating Instructions Manual

Search results

Summary of Contents for LMS511 SE

Reviews:

Related manuals for LMS511 SE

Brands by name

Popular brands