Chapter
6
Operating Instructions
ICR890 High-end CCD Camera System
82
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Operation
Sta
r
ting the SOPAS-ET Configuration Software and calling the scan assistant
1. Switch on the power supply to the ICR890 System/MSC800.
The ICR890 System and the MSC800 carry out a self-test and are initialized.
2. Switch on the PC and start the SOPAS-ET Configuration Software.
The SOPAS-ET Configuration Software opens the program window with an English
program interface as standard.
3. In order to change the language setting, click on C
ANCEL
and change the language of
the program interface to G
ERMAN
/D
EUTSCH
via the menu T
OOLS
/O
PTIONS
.
4. Once the language setting has been changed, shut down the SOPAS-ET Configuration
Software, restart.
5. In the dialog window select the option C
REATE
A
NEW
P
ROJECT
and click on OK to confirm
it.
6. In the main window under S
CAN
-A
SSISTENT
click on the C
ONFIGURATION
button.
The dialog window S
CAN
W
IZARD
appears.
Configuring the serial connection
1. In the dialog window S
CAN
W
IZARD
under S
ERIAL
P
ORT
/S
TANDARD
P
ROTOCOL
check the
check box for E
NABLE
S
ERIAL
C
OMMUNICATION
.
2. Click on the A
DVANCED
... button.
3. Under B
ITS
PRO
S
EKUNDE
deactivate all the baud rates except 57.6 kbd.
4. Select the following P
ORT
SETTINGS
: 8 data bits, no parity, 1 stop bit.
5. Click on OK to confirm settings.
The dialog window A
DVANCED
SCAN
SETTINGS
closes.
Configuring the Ethernet connection
1. In the dialog window S
CAN
W
IZARD
under I
NTERNET
P
ROTOCOL
/I
NTERNET
P
ROTOCOL
IP check
the check box for E
NABLE
IP C
OMMUNICATION
.
2. Click on the A
DD
button.
3. Enter the IP address of the ICR890 System and confirm it via OK in the dialog window.
The dialog window closes. A new entry appears in the IP A
DDRESS
CONFIGURATION
list.
4. Click on OK to confirm settings.
The dialog window A
DVANCED
SCAN
SETTINGS
closes.
Carrying out a scan
1. In the dialog window S
CAN
W
IZARD
click on the S
CAN
button.
2. Select the listed devices (ICR890 and MSC800) and confirm via A
DD
DEVICE
.
Connected devices are searched for via the connection. The SOPAS-ET Configuration
Software inserts the found devices in the project tree and uploads the current
parameter set (S
YNC
C
HECK
).
3. For configuration of the devices see