SICK CLV 490 Series Operating Instructions Manual Download Page 37

Page: 37 / 266

Operating Instructions

Chapter

CLV 490 Bar Code Scanner

8 009 993/O824/20-12-2004

4-1

Installation

4.1

Installation sequence

•

Change the language version of the laser warning label (if necessary)

•

Select the mounting location for the CLV

•

Mount the CLV and align the CLV with the bar code

•

Mount the CDB 420 or CDM 490 Connection Module

•

Connect the CLV to the CDB 420 or CDM 490 Connection Module

•

Adjust the CLV so that it is in line with the bar code

•

Mount the reading pulse sensor for external triggering the reading pulse

•

Option with event-controlled dynamic focus control:

mount the sensors for detecting the object distance

Note

Don’t open the device. The producer warranty will be forfeited if the device is opened.

4.2

Preparations

4.2.1

Required components

•

CLV Bar Code Scanner

4.2.2

Required accessories

•

SICK mounting bracket for the CLV: depending on the order, angle bracket

no. 2 013 824, articulated bracket no. 2 018 435, or quick-clamping device

no. 2 016 110 with securing material for the CLV

– or –

Alternatively, if the bracket is supplied by the user

– Stable mounting device that allows the alignment of the CLV to be varied in the x and

y axes. The weight of the CLV (line scanner) is 1.5 kg (3.3 lb) and 2.2 kg (4.84 lb) as

a line scanner with oscillating mirror.

– 2 screws M6 for the CLV. The screw length depends on the wall thickness of the

bracket used. Depth of engagement in

CLV max. 7 mm (0.28 in)

from housing sur-

face.

•

CDB 420 or CDM 490 Connection Module (not included in the scope of supply of

the CLV)

•

Reading pulse sensor for external reading pulse triggering, e. g. photoelectric reflex

switch/ photoelectric proximity switch (not included in the scope of supply of the CLV)

•

Option with event-controlled dynamic focus control: sensors for detecting the object

distance, e. g. photoelectric reflex switches/photoelectric proximity switches (not

included in the scope of supply of the CLV)

•

Optionally for internal tracking: an incremental encoder (not included in the scope of

supply of the CLV)

4.2.3

Required auxiliary parts

•

2 screws M6 for securing the SICK mounting bracket to the base. The screw length

depends on the wall thickness of the base.

•

Set of laser warning labels (if necessary)

•

Tool

Summary of Contents for CLV 490 Series








































































































































































































































































Search results

Summary of Contents for CLV 490 Series

Reviews:

Brands by name

Popular brands

SICK CLV 490 Series, Operating Instructions Manual

Search results

Summary of Contents for CLV 490 Series

Reviews:

Brands by name

Popular brands