SICK CLV 490 Series Operating Instructions Manual Download Page 136

Page: 136 / 266

Chapter

Operating Instructions

CLV 490 Bar Code Scanner

6-58

8 009 993/O824/20-12-2004

Operation

6.5.13

Self-test

After the CLV has been switched on, it performs a self-test before it is initialized with the

parameter set. The test can be called up explicitly at any time via CLV-Setup. During the self-

test, the CLV checks that its hardware components are functioning correctly. A final

message via the terminal interface provides information on the test result. The CLV does not

output a reading result during the test routine.

Click

in the toolbar.

The Terminal Emulator window is then displayed. The CLV is in the Reading mode.

In the D

EVICE

ODE

section, choose S

ELF

TEST

The "Device Ready" LED is extinguished. The CLV cancels the Reading mode and starts

the test routine.

After a few seconds, the CLV outputs the encoded test result in the form of a code

number (

Fig. 6-19

To return to the Reading mode, click R

EADING

ODE

or close the Terminal Emulator.

The CLV then returns to the Reading mode and the "Device Ready" LED lights up.

The code number ”15

000

” means that the self-test was completed successfully and that

no faults were diagnosed.

Chapter 8.3.1 CLV without external parameter memory, Page 8-2

lists the error keys together with the associated corrective measures.

Fig. 6-19:

CLV-Setup: Displaying the self-test result in the Terminal Emulator

Summary of Contents for CLV 490 Series








































































































































































































































































Search results

Summary of Contents for CLV 490 Series

Reviews:

Brands by name

Popular brands

SICK CLV 490 Series, Operating Instructions Manual

Search results

Summary of Contents for CLV 490 Series

Reviews:

Brands by name

Popular brands