![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249040.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 40 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
To select an Audio Summing mode:
1. Menu: DEVICE
UTILITIES > AUDIO
SUMMING
2. Use the control wheel to select an option, and then
press Enter.
Note: When set to OFF, Audio Summing is disabled.
Adjusting Gain for Summed Outputs
Use the gain controls for each channel to create the
overall mix balance. The front panel LEDs indicate the
audio level for each channel. If an overload occurs, the
red LEDs will illuminate indicating that the internal limiter
is active and the display will show an overload message.
To correct, adjust the overall gain balance.
Receiver Output Level
The following table describes the typical total system gain
from the audio input to the receiver outputs:
Receiver Output Gain
Output Jack
System Gain (gain control = 0dB)
XLR (line setting) +24 dB