9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 66 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
Mixer Inputs
Signal Processor Inputs
Recorder Inputs
Forming an Audio Route
Launch the Dante Controller and click on the intersection
point between components to form an audio route. The
audio route is also referred to as a Subscription.
1. Find the intersection between the transmitter and
receiver channels.
2. Click on the
where the components meet.
3. A green checkmark
indicates that the audio
route has been established.
4. Check the audio to verify that the audio route has
been formed.
For additional information about the Dante controller, visit
www.audinate.com.
Network Troubleshooting
Use only one DHCP server per network
All devices must share the same subnet mask
All receivers must have the same level of firmware
