![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249064.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 64 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
network discovery by Dante enabled Yamaha mixing
consoles.
Note: Changing the Dante ID will cause a loss of audio signal.
After an ID has been changed, use the Dante controller to restore
audio route subscriptions using the new ID.
Setting the Device ID from the receiver menu:
1. DEVICE
UTILITIES >
NETWORK > DANTE > Dev.
ID
2. Use the control wheel to select an ID
MODE:
Off: Manually enter an ID by using the control
wheel. Press ENTER to save.
Sequential: Adds a 3-digit numerical prefix to the
receiver model name to create the device ID. (ex:
001-Shure-ULXD). Use the control wheel to
increment the prefix value. Press ENTER to save.
Yamaha: Adds a prefix starting with "Y" followed
by 3-digits to the receiver model name to create
a device ID that allows Dante enabled Yamaha
mixing consoles to discover ULX-D receivers on a
Dante network. (ex: Y001-Shure-ULXD). Use the
control wheel to increment the prefix numerical
value. Press ENTER to save.
Entering the Device ID from the Dante controller:
1. Open the Device
View and select the receiver from
the pulldown menu.
2. Click on the Device
Config tab.
3. Enter the ID in the Rename
Device box and press
ENTER.
Viewing Dante Device IDs in the Dante Controller
Dante device IDs are displayed in the Network
View
window in the Dante Controller.
1. Launch the Dante controller and open the Network
View window.
2. Verify that the Dante device IDs match the IDs