![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249053.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 53 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
An IP address must be assigned to each device in the
network to ensure communication and control between
components. Valid IP addresses can assigned
automatically using a DHCP server or manually from a list
of valid IP addresses. If using Dante audio, a separate
Dante IP address must also be assigned to the receiver.
Automatic IP Addressing
1. If using a DHCP capable Ethernet switch, set the
DHCP switch to ON.
2. Set the IP Mode to Automatic for all receivers:
DEVICE
UTILITIES > NETWORK > SHURE
CONTROL
> NETWORK
3. Use the control wheel to set the mode to Automatic,
press ENTER to save.
Note: Use only one DHCP server per network.
Manual IP Addressing
1. Connect the receivers to an Ethernet switch.
2. Set the IP Mode to Manual for all devices: DEVICE
UTILITIES > NETWORK > SHURE
CONTROL >
NETWORK
3. Use the control wheel to set the mode to Manual.