9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 71 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
to the transmitter. IR ports must be aligned for the
entire download, which can take 50 seconds or
longer.
Connecting to an External
Control System
The ULX-D receiver is compatible with external control
systems such as AMX or Crestron via the Ethernet, using
on the same cables used to carry Shure Control (WWB6).
Use only one controller per system to avoid messaging
conflicts.
Connection: Ethernet (TCP/IP; ULX-D receiver is the
client)
Port: 2202
For a comprehensive list of ULX-D command strings, visit:
http://shure.custhelp.com/app/answers/detail/a_id/4976
Setting the Gateway to Allow Cross
Subnet Routing
ULX-D receivers include gateway addressing to support
cross-subnet routing. The gateway setting allows a single
controller to manage devices assigned to different
subnets such as multiple rooms or multiple buildings.
Note: A gateway address is an advanced network setting. In most
network configurations, the setting does not need to be changed.
To set the receiver gateway:
1. From the receiver menu: DEVICE
UTILITIES >
NETWORK > SHURE
CONTROL > NETWORK
2. Press and turn the control wheel to set the Mode to
