![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249019.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 19 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
Transmitter Input Clip
The following warning displays on the receiver LCD panel
when the transmitter input is clipped:
To correct, set MIC.OFFSET to 0 dB and if necessary,
attenuate the signal source.
If the source cannot be attenuated while using a
bodypack transmitter, select INPUT
PAD from the main
menu to attenuate the input signal by 12 dB.
MIC.OFFSET
MIC.OFFSET compensates for signal level differences
between transmitters that share the same receiver
channel.
Set the offset gain on a low signal level transmitter to
match a louder transmitter: UTILITY > MIC.OFFSET
Note: For normal gain adjustments, use the receiver gain buttons.
Transmitter Audio Mute Mode
Mute Mode reconfigures the transmitter power switch to