![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249059.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 59 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
Redundant Audio Mode
Use Redundant mode to carry a backup copy of the
Dante audio on the Secondary network in case the audio
on the primary network is interrupted.
Network Characteristics:
Dante Primary Audio and Shure Control are present
on the Primary port
Backup Dante audio is present on the Secondary port
The Primary Dante IP address and the Shure Control
IP address must be on the same subnet. The
computer running WWB6 must also be on this
subnet.
The Secondary Dante IP Address must be set to a
different subnet
Note: Devices connected to the Redundant network must be
compatible with Redundant audio.
Network Example
ɠ
Computer
Connect the computer running the
Dante controller and WWB6 to the
Primary port.
ɡ
DHCP
Server
Can be configured with or without a
DHCP server. Do not route audio
through the server.
ɢ
Gigabit
Ethernet
Switches
Use dedicated switches for the
Primary and Secondary networks
Do not connect both network ports
to the same Ethernet switch
Use a star network topology to
minimize audio latency
ɣ
Receiver
Connection
Connect Primary and Secondary ports
to dedicated switches.