![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249031.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 31 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
PRESETs automatically configure the transmitter. Each
parameter has the default value KEEP, which leaves that
setting unaffected by a sync.
Feature
Setting
BP
PAD
+0 dB, -12 dB
LOCK
Power, Menu, All, None
RF
POWER
10mW=Nm (normal), 1mW=Lo
(low), 20mW=Hi (high)
BATT
Alkaline, NiMH, Lithium
BP
OFFSET
0 dB to +21 dB (in 3 dB
increments)
HH
OFFSET
0 dB to +21 dB (in 3 dB
increments)
MUTE
MODE
OFF, ON
Cust.
Group
OFF, ON
Note: When Cust.
Groups is set to on, it may take up to 30
seconds to complete an IR sync.
Creating a System Preset
System Presets allow a current receiver setup to be saved
and restored. Presets store all receiver settings to provide
a quick way to configure a receiver or switch between
several different setups. Up to 4 presets can be stored in
receiver memory.
To save the current receiver setup as a new preset:
DEVICE
UTILITIES > SYSTEM
RESET > SAVE > CREATE
NEW
PRESET
Use the control wheel to name the preset, and then press
Enter to save.
To recall a saved preset: DEVICE
UTILITIES > SYSTEM