![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249049.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 49 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
manually selected frequencies to networked receivers
prior to a group scan to simplify system set up.
Tip: Use Wireless Workbench or Wireless Frequency
Finder to select the best compatible frequencies. See
www.shure.com for more information.
To create a custom group: DEVICE
UTILITIES >
ADVANCED
RF > CUSTOM
GROUPS > SETUP
Use the control wheel to choose group, channel and
frequency values. Press ENTER to save.
Prior to performing a group scan, export a custom group
to networked receivers:
1. Go to DEVICE
UTILITIES > ADVANCED
RF >
CUSTOM
GROUPS > EXPORT
2. Press the flashing ENTER button to export all custom
groups to all receivers on the network.
Note: Use the CLEAR
ALL option to remove all custom group
settings.
Audio Signal Encryption
When encryption is enabled, the receiver generates a
unique encryption key which is shared with a the
transmitter during an IR sync. Transmitters and receivers
that share an encryption key form a protected audio path,
preventing unauthorized access from other receivers.
Encrypting a Single Transmitter to a Single Receiver
1. From the receiver menu: DEVICE
UTILITIES >
ENCRYPTION >
ON
(Auto)
2. Press ENTER.
3. Perform an IR Sync to share the encryption key with
the selected transmitter.