9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 54 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
4. Set valid IP addresses and subnet values for all
devices, press ENTER to save.
Dante IP Addressing
IP addresses for a Dante network can assigned
automatically using a DHCP server or manually from a list
of valid IP addresses
To select the Dante IP addressing mode (Automatic or
Manual): DEVICE
UTILITIES > NETWORK > DANTE >
AUDIO
&
CNTRL
Use the control wheel to select the mode, and then press
ENTER to save.
Networking Acronyms
DHCP: Dynamic Host Configuration Protocol
LAN: Local Area Network
MCU: Micro Controller Unit
RJ45: Ethernet Connection
RX: Receiver
TX: Transmitter
WWB6: Wireless Workbench 6 Software
VLAN: Virtual Local Area Network
MAC: Machine Access Code
Overview of Dante Network Modes
The Dante network interface has two ports (Primary and
Secondary) to provide flexible routing and configuration
options for network signals.
Three selectable Dante network modes are available to
