![background image](http://html1.mh-extra.com/html/shure/ulx-d-quad-z16-20/ulx-d-quad-z16-20_user-manual_1262249036.webp)
9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 36 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
Setting Receiver Gain
The receiver gain control sets the audio signal level for
the entire receiver and transmitter system. Changes to the
gain settings occur in realtime allowing for adjustments
during live performances. When adjusting the gain,
monitor the audio meter levels to prevent signal
overloads.
Receiver Gain Controls
The gain can be adjusted by using the gain
̖
▼
buttons
or by entering the AUDIO menu and using the control
wheel.
Tip: To quickly adjust the gain, press and hold a gain
button to enable accelerated scrolling.
Reading the Audio Meter
The audio meter displays yellow, green, and red LEDs to
indicate the audio signal level. Audio peaks illuminate the
LEDs for 2 seconds, while the RMS signal is displayed in
realtime.
When setting up the receiver, adjust the gain so that the
average signal LED levels are solid green and occasionally