Shimadzu AGS-100NX, Instruction Manual

Page: 125 / 154

Chapter 6 Performing Compression and Bending Tests
6-7
6.5 Attaching Specimens
Make sure the bending punch does not contact the specimen.
6.6 Performing the Test
Perform tests according to the same guidelines provided for tensile tests (see 5.6
Starting Tests).
(4) Zero the test force.
(1) Adjust the distance between supports.
Supports
(2) Place the specimen in the center of the
supports.
(3) Use jog operations to move the bending
punch a little above the specimen.
If it needs to move a long distance, move it
with [HIGH SPEED] ON, then after it is
closer, move it with [HIGH SPEED] OFF.
Specimen
Bending Punch