Shimadzu AGS-100NX, Instruction Manual

Page: 79 / 154

Chapter 4 Operating Panel
4-23
9. Maximum Action / Minimum Action

Setting Maximum and Minimum Action
Specifies the crosshead action when it reaches a maximum or minimum point.
[Setting Procedure]
[Setting Value]
<Single Test>
•
Stop The crosshead is stopped after it reaches the maximum point.
(default setting)
•
Return The crosshead returns quickly to its origin point after reaching the
maximum point.
<Cycle Test>
•
Manual After reaching the maximum point, the crosshead is held in place
until the [START] button is pressed.
•
Return The crosshead returns quickly to its origin point after reaching the
maximum point.
If the maximum point action is set to [Return], then the crosshead will automatically return
quickly to its origin position after reaching the maximum point.
Max. Point Action
Max. Point Action
Max.Action
>Max.Action
Stop
METHOD