Shimadzu AGS-100NX, Instruction Manual

Page: 80 / 154

Chapter 4 Operating Panel
4-24

Setting the Hold Period
Specifies how long to hold the crosshead when it reaches a maximum or minimum point.
[Setting Procedure]
[Setting Value]
Parameter Default Value Setting Range
Hold Time 0 sec 0 sec to 99999 sec

Setting the Hold Sensor
Specifies which input to keep constant during hold mode.
[Setting Procedure]
[Setting Value]
•
Stroke Holds the stroke value constant. (default setting)
•
Force/Stress Holds the test force or stress value constant.
If the hold period for single or cycle tests is set to a second or more, or the maximum point
action for cycle tests is set to [Manual], then the hold sensor must be selected.
Max. Point Action
Hold Period
Max.Action
>Hold Time
0 sec
METHOD
Max. Point Action
Hold Sensor
Max.Action
>Hold Sensor
Force
METHOD