manualshive.com logo in svg

Sharp AR-505, Operation Manual

Share
Download
Sharp AR-505 Operation Manual Download Page 77

3-43

CHAPTER

3

TANDEM COPY

1

Ensure that the two copiers are connected through the
SCSI cable and they have been turned on.

2

On the copier that will be set as the main copier, place
the originals in the document feeder tray or on the
document glass.

3

Press the SPECIAL MODES key.

●

The SPECIAL MODES screen will appear.

4

Press the “TANDEM COPY” key on the touch panel.

●

The  “TANDEM COPY” key will be highlighted.

If this copier is connected with another copier of the same model through
the SCSI cable, copying can be performed using the two copiers allowing
copying to be twice as fast as copying on one copier when making multiple
copies.

●

A dedicated SCSI cable AR-CA1 is required for tandem copying.

●

The tandem copying can be used only in the sort mode or staple sort
mode. The group mode cannot be selected.

●

The transparency inserts function cannot be used with this function
because the number of copies must be 1 when the transparency inserts
function is used.

●

When tandem copying is to be performed, either of the two connected
copiers can be used as the main copier. When the tandem function is
selected on one of the copiers, the other will become the sub copier. The
setting procedure is described below.

●

INTERRUPT will not function during tandem copying.

READY TO CO

SPECIAL FUNCTIONS

  Tandem copy

READY TO COPY. 

SPECIAL MODES

MARGIN SHIFT

MULTI SHOT

TANDEM

COPY

ERASE

COVERS

IMAGE EDIT

TEXT STAMP

TRANSPARENCY

INSERTS

DUAL PAGE

COPY

OK

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

AUTO A4

Summary of Contents for AR-505















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands