8-2
CHAPTER
8
KEY OPERATOR CODE NUMBER
Registering the key operator code number
1
Press the CUSTOM SETTINGS (
) key.
2
Press the “KEY OPERATOR PROGRAMS” key on the
touch panel.
●
The following display will appear.
3
Enter your key operator code number using the 10-key
pad.
●
When registering the key operator code number for the first time,
enter the number that was set at the factory. (See page 8-33.)
●
As the code number is entered, the dashes in the display will
change to asterisks.
4
Press the “COPIER” key on the touch panel.
5
Press the “OTHER FUNCTION SETTINGS” key.
6~200
g
/m
2
CUSTOM SETTINGS
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
EXIT
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
KEY OPERATOR PROGRAMS
EXIT
COPIER
TOTAL COUNT.
PROGRAM LIST
PRINTOUT.
COPIER
PDA/ZR
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
ENABLE/DISABLE
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
OK
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
EXIT
KEY OPERATOR CODE
- - - - -
A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
KEY OPERATOR’S GUIDE
Key operator code number
