Sharp AR-505 Operation Manual Download

Page: 31 / 174

2-17

CHAPTER

MAKING COPIES

Sort/group

SORT/GROUP

When the SORT (

) icon is indicated on the touch panel, copies

will be collated by sets and then delivered to the exit tray.
When the GROUP (

) icon is indicated, copies will be grouped by

originals.

●

When the RSPF is used for copying, copies will be collated in the
default setting. To copy in the GROUP mode, press the OUTPUT
key and then select the GROUP mode on the touch panel. When
the GROUP mode is selected, the GROUP (

) icon is indicated

on the touch panel.

●

When the document glass is used for copying, the copier is not in
the SORT nor GROUP mode. Copies will be delivered face up
each time the START (

) key is pressed. To copy in the SORT or

GROUP mode, press the OUTPUT key and then select the SORT
mode or GROUP mode on the touch panel. Copies will be
delivered face down.

SORT mode

Each set of copies will be sequentially delivered to the exit
tray.

GROUP mode

All copies of the same original will be grouped in the exit
tray.

Summary of Contents for AR-505















































































































































































Search results

Summary of Contents for AR-505

Reviews:

Related manuals for AR-505

Brands by name

Popular brands

Sharp AR-505, Operation Manual

Search results

Summary of Contents for AR-505

Reviews:

Related manuals for AR-505

Brands by name

Popular brands