2-15
CHAPTER
2
5
Press the “PAPER SELECT” key on the touch panel and
then select the bypass tray.
●
If paper type selection has been enabled, select “60 ~ 105
g
/m
2
”
(“16 ~ 28 lbs.”) or “106 ~ 200
g
/m
2
” (“28+ ~ 55 lbs.”).
●
If “60 ~ 105
g
/m
2
” (“16 ~ 28 lbs.”) is specified and heavier paper
is used, a misfeed may occur.
6
Set the number of copies.
7
Press the START (
) key.
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of specification for duplex module
is used.
1
Place the first original face down on the document glass
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
2
Replace the first original with the second original and
close the document cover.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
●
The first and second originals can be set in the document feeder
tray. They must, however, be set and fed individually.
3
Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Press the “PAPER SELECT” key and select the bypass
tray.
●
If paper type selection has been enabled, select “60 ~ 105
g
/m
2
”
(“16 ~ 28 lbs.”) or “106 ~ 200
g
/m
2
” (“28+ ~ 55 lbs.”).
5
Press the START (
) key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
1 2
COPY.
O
URE
PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2
1.
2.
A4
A3
A4R
1
2
3
4
5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
1.
2.
A4
A3
A4R
PAPER TYPE
60~105
g
/m
2
106~200
g
/m
2
