2-9
CHAPTER
2
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
4
Use the 10-key pad to enter the desired number of
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
●
If you set a multiple number of copies, the copies will not be
delivered collated in the default setting. To deliver in the SORT
mode, press the OUTPUT key and then select the SORT mode
on the touch panel. See page 2-17.
5
Press the START (
) key.
●
If the copier is not in the SORT mode (the sort icon is not
displayed on the touch panel), copying will start and the number
in the copy quantity display will decrease by 1 each time a copy
is made. To repeat the same copy sequence with a different
original, simply replace the original and press the START (
)
key.
●
If the copier is in the SORT mode, the original will be scanned
when the START (
) key is pressed but copying will not begin.
Proceed to step 6.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the number in the copy quantity display will be reset
to 0.
6
Replace the first original with the next original after the
START (
) key indicator lights up, and then press the
START (
) key. Repeat this step until all the originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
●
Copying will start after the “READ-END” key is pressed.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
2-sided copies from 1-sided originals
1
Set the first page of the document onto the document
glass, using the centring scale to position it.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
2
Close the document feeder cover.
●
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically selected.
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
3
AUTO A4
Original size detector
Centring scale
