8-13
CHAPTER
8
To change an account number
1.
Press the “CHANGE” key.
2.
Enter the account number to be changed using the
10-key pad.
3.
Enter a new account number.
4.
Press the “ENTER” key.
●
If a number that is already registered is entered, the message
“
THIS NUMBER IS ALREADY USED.
” will appear. Press the
“OK” key and enter another number.
5.
To change other account numbers, repeat steps 2 to 4.
Press the “OK” key twice to exit the program.
To print all registered account numbers
1.
Press the “PRINT” key.
●
The copier will start printing. To stop printing after starting,
press the “CANCEL” key.
2.
Press the “OK” key to exit the program.
Price/Copy Setting
This program is used to set the price per copy. Three price per copy
values can be set (#1, #2, and #3). As copies are made, the cumulative
cost of the copies is kept in memory.
When the “PRICE/COPY SETTING.” key is pressed, the following
display will appear.
1.
Enter the new price for price code #1 by using the 10-key
pad and then press the “ENTER” key.
●
Use the INTERRUPT (
) key for decimal points.
●
If the “ENTER” key is pressed without entering a value, the price
per copy will not be changed.
2.
Similarly enter the prices for price codes #2 and #3.
●
The following display will appear.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
PRICE/COPY SETTING
INPUT NEW UNIT PRICE AND PRESS [ENTER].
USE INTERRUPT KEY FOR DECIMAL POINT.
PRICE CODE
# 1
80
-
# 2
60
-
# 3
180
-
PRESENT PRICE
NEW PRICE
ENTER
OK
1/2
KEY OPERATOR’S GUIDE
Key operator programs