Sharp AR-505 Operation Manual Download

Page: 55 / 174

3-21

CHAPTER

Press the “IMAGE EDIT” key on the touch panel.

●

The IMAGE EDIT menu will appear.

Press the “CENTRING” key.

●

The “CENTRING” key will be highlighted.

Press the upper “OK” key.

Make all other desired copier selections and enter the
desired number of copies.

Press the START (

) key.

●

If the document feeder is used, scanning of originals and copying
will start.

●

If the document glass is used in the SORT mode, proceed to the
next step.

Replace the finished original with the next original after
the START (

) key indicator lights up, and then press

the START (

) key. Repeat this step until all originals

have been scanned. Then, press the “READ-END” key
on the touch panel.

●

Copying will start at this time.

●

Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.

●

To cancel the CENTRING function, press the “CENTRING” key
again on the IMAGE EDIT menu screen.

SPECIAL FUNCTIONS

Image editing functions

CLEAR

PROGRAM

AUDIT CLEAR

INTERRUPT

CLEAR

INTERRUPT

CLEAR ALL

START

IMAGE EDITING FUNCTIONS

READY TO COPY.

SPECIAL MODES

IMAGE EDIT

CENTRING

B/W

REVERSE

REPEAT COPY

BINDING

CHANGE

READY TO COPY.

SPECIAL MODES

IMAGE EDIT

CENTRING

BINDING

CHANGE

REPEAT CO

B/W

REVERSE

READY TO COPY.

SPECIAL MODES

MARGIN SHIFT

MULTI SHOT

PAMPHLET COPY

ERASE

COVERS

IMAGE EDIT

TEXT STAMP

TRANSPARENCY

INSERTS

DUAL PAGE

COPY

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

3A3

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

READ-END

PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].

Summary of Contents for AR-505















































































































































































Search results

Summary of Contents for AR-505

Reviews:

Related manuals for AR-505

Brands by name

Popular brands

Sharp AR-505, Operation Manual

Search results

Summary of Contents for AR-505

Reviews:

Related manuals for AR-505

Brands by name

Popular brands