8-20
CHAPTER
8
Staple Position Setting
This program is used to select the initial stapling position for an optional
finisher (AR-FN3).
When the “STAPLE POSITION SETTING.” key is pressed, the following
display will appear.
1.
Select the desired stapling position on the touch panel.
2.
Press the “OK” key.
Date Format Setting
This program is used to set the initial date format for the date function.
When the “DATE FORMAT SETTING.” key is pressed, the following
display will appear.
1.
Select the desired date format on the touch panel.
●
The date formats displayed on the touch panel may be different
from the illustration above depending on the country or region.
2.
Press the “OK” key.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
STAPLE POSITION
SETTING.
OK
KEY OPERATOR PROGRAMS
23 July, 1999
July 23, 1999
23/07/99
07/23/99
DATE FORMAT SETTING.
OK
KEY OPERATOR’S GUIDE
Key operator programs
