SELVA MARINE Kingfish 25, Service Manual

Page: 308 / 398

9-18
9
3. Install the rubber washers 5 , washers
6 , and bolts 7 to the lower mounts 8 ,
and then install the lower mount assem-
blies.
4. Install lower mount housing 1 9 , and
then tighten the nuts 0 to the specified
torque.
5. Install the caps A and lower mount cov-
ers B .
6. Install the upper case assembly
C
to the
bracket assembly
D
.
7. Install the washers
E
, and then tighten
the self-locking nuts
F
to the specified
torque.
8. Install lower mount housing 2
G
, and
then tighten the bolts
H
to the specified
torques in 2 stages in the order
1
,
2
,
and so on.
9. Connect the ground lead.
Upper mount bolt
4
:
26 N·m (2.6 kgf·m, 19.2 ft·lb)
Lower mounting nut 0 :
54 N·m (5.4 kgf·m, 39.8 ft·lb)
1
2
2
4
3
LT
572
LT
A A
A
7
6
B
5
8
0
9
LT
572
LT
A A
1322
Self-locking nut
G
:
24 N·m (2.4 kgf·m, 17.7 ft·lb)
Lower mount housing bolt
I
:
1st: 14 N·m (1.4 kgf·m, 10.3 ft·lb)
2nd: 24 N·m (2.4 kgf·m, 17.7 ft·lb)
F
E
E
H
H
C
LT
271
1401
D
G
H H
± #
$ !
Upper case and mounts (S-transom, for Europe)