SELVA MARINE Kingfish 25, Service Manual

Page: 172 / 398

7-24
7
3. Remove the timing belt
3
from the
driven sprocket, and then remove it from
the drive sprocket.
4. Loosen the bolt
4
, and then remove the
driven sprocket
1
.
5. Loosen the nut 6 , and then remove the
retaining plate 7 , drive sprocket 2 , and
Woodruff key 8 .
Checking the timing belt and
sprocket
1. Check the interior and exterior of the tim-
ing belt. Replace if cracked, damaged, or
worn.
2. Check the drive sprocket and driven
sprocket. Replace if cracked, damaged,
or worn.
Installing the sprocket and timing
belt
Do not turn the crankshaft or driven
sprocket when the timing belt is not
installed. Otherwise, the pistons and
valves could collide with each other and
be damaged.
1. Install the Woodruff key
1
, drive
sprocket
2
, and retaining plate
3
, and
then tighten the nut
4
to the specified
torque.
Flywheel holder
5
: 90890-06522
6C5-462XX-XX
3
1
5
4
6
8
7
2
Crankshaft holder
9
: 90890-06355
9
2 6
9
4
3
4 3
2
2
E
1
1
Flywheel magnet and timing belt