(3)
(3a)
(4)
(5)
(6)
(7)
(4a)
7
Installing the operator
Installation
3.
Attach the C-rail to the front fixing angle (3). Put a carton piece
under the motor head unit to avoid damages.
4.
To fix the motor head to the ceiling we recommend you to use
a ladder (4). When the operator is laying on the ladder you can
open the garage-door. Adjust the C-rail according to the mark you
made in the middle of the garage-door.
Fix the operator to the ceiling when you have made sure the C-rail
is running straight to the front. Use the supplied bracket to fix the
C-rail to the ceiling (pic. 4 and 4a).
5.
Now fix the door arm to the garage door (6). Take care that the
Now fix the door arm to the garage door (6). Take care that the
angle between the operator and the door arm does not exceed a
max. of 45° (it may be lower).
6. The limit-blocks must be tightened before running the
operator!
The garage doors‘ bolts must be removed before running
the operators - otherwise damages on the garage door or
operator might occure!
For additional security our locking set can be obtained as an
optional extra.
Summary of Contents for TS Akku II
Page 24: ...24...
