background image

Grombacher Straße 83

75045 Walzbachtal-Jöhlingen

Germany

www.seip.com

We,

Wir,

Seip Antriebstechnik GmbH

Grombacher Straße 83, 75045 Walzbachtal-Jöhlingen, Deutschland

hereby declare, that the following products comply to the mentioned EC-regulations.

erklären hiermit, daß die nachfolgenden genannten Produkte den unten angegebenen  

EG-Richtlinien entsprechen.

EC Declaration of Confirmity

Low-Voltage Directive 73/23/EEC 
and amendments
Electro-Magnetical Compatibility 89/336/EEC
and amendments

EG-Konformitätserklärung

im Sinne der EG-Richtlinien

Niederspannungsrichtlinie 73/23/EWG 

mit Änderungen

Elektromagnetische Verträglichkeit 89/336/EWG 

mit Änderungen

Peter Seip, Geschäftsführer, Walzbachtal-Jöhlingen, 4.01.005

Document No. AN-1606003

Dokument Nr. AN-16062003

TECHNIK

ANTRIEBS

ANTRIEBS

GmbH

Type of Product 

/ Produktart

Garage Door Operator

 / Torantrieb

Product Name

 / Modell

TS Solar/TS Akku

Approved according to 8/336/EEC and 73/3/EEC / 

Geprüft nach 89/336/EWG und 73/23/EWG

Referring EC-regulations: / 

Angewandte harmonisierte Normen:

Electromagnetic Compatibility /  

Elektromagnetische Verträglichkeit

EN 61000-3-2:2000

Limits for harmonic current emissions /   

Grenzwerte für Oberschwingströme

EN 61000-3-3:1995 + Corrigendum:1997 + A1:2001

Limitation of voltage changes, voltage fluctuations and flicker in publik low-voltage supply systems /  

Grenzwerte für Spannungsschwankungen und Flicker

EN 61000-6-3:2001

Emission standard for residential, commercial and light-industrial environments /  

Störaussendung für Wohnbereich, Geschäfts- und Gewerbereiche sowie Kleinbetriebe

EN 61000-6-2:2001

Generic standards - Immunity for industrial environments

Fachgrundnorm - Störfestigkeit - Industriebereich

Low-Voltage Directive /  

Niederspannungsrichtlinie

EN 60335-2-95:2001-7

Particular requirements for drives for vertically moving garage doors for residential use /  

Anforderungen für Antriebe von Garagentoren mit Senkrechtbewegung zur Verwendung im Wohnbereich

EN 60335-1:1994

 

+ A1:1996 + A2:2000 + A11:1995 + A12:1996 + A13:1998 + A14:1998 + A15:2000 + 

A16:2001

Safety of household and similar electrical appliances / 

Sicherheit elektrischer Geräte für den Hausgebrauch

Safety in Use /  

Nutzungssicherheit

EN 12453:2000

Safety in use of power operated doors, requirements /  

Nutzungssicherheit kraftbetätigter Tore, Anforderungen

EN 12445:2000

Safety in use of power operated doors, Test methods /  

Nutzungssicherheit kraftbetätigter Tore, Prüfverfahren

Summary of Contents for TS Akku II

























Reviews: