Maintenance
TPR User Manual
88
3. Click
Default settings
.
The parameters are reset.
Resetting Parameters via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Highlight the TPR in the device list.
3. Select
Actions – Default Settings
from the menu bar.
4. Click
Finish
.
The parameters are reset.
Resetting the parameters via the status/reset button
LEDs, various ports and the status/reset button can be found on the
TPR. These components are described in the 'Quick Installation
Guide'.
Using the status/reset button you can reset the parameter values of
the TPR to their default settings.
Proceed as follows:
1. Press the reset button for 5 seconds.
The TPR restarts.
The parameters are reset.
If you want verify the reset, you can print a service page. To do this,
press the status/reset button for a short time.