Personal Printing Settings
TPR User Manual
48
The printer ID must be identical to the ID on the Personal Printing
server.
You can configure various parameters to customize the print output.
Proceed as follows:
1. Start the TPR Control Center.
2. Select
DEVICE - Personal Printing
.
3. Enter the ID of the connected printer into the
Printer ID
box.
4. Specify the parameters for the print output; see: Table 11
5. Click
Save
to confirm.
The setting will be saved.
Table 11: Print Output Parameters
Parameters
Description
Trigger print jobs separately
Enables/disables the release of one single print job per
cardswipe. If several print jobs are available, they have
to be released individually one after another.
Format User-ID
Enables/disables the formatting of the User IDs. If this
option is enabled, the ID elements will be separated by
hyphens and letters will be capitalized.
The format of the User ID must be identical to the format
used on the Personal Printing server. Enable the option if
you have configured your Personal Printing environment
for the TPR software and firmware versions 14.0.16 and
earlier.
Beeper
Enables/disables the audio feedback. Acoustic signals
give information about the triggering of print jobs; see
'Quick Installation Guide'.
Job deletion
- by the Personal Printing server: Printed jobs will be
immediately deleted by the Personal Printing server.
- by the TPR: Printed jobs will be deleted by the TPR.
The time of deletion can be defined via the delay.
- none: Printed jobs will be deleted as defined in the
settings on the Personal Printing server.
Delay
Defines a delay (in seconds) for the deletion of printed
jobs by the TPR. (0 = immediate deletion)
A delay assures the complete transfer to the printer and
printout of the print job.
