ThinPrint Settings
TPR User Manual
54
Proceed as follows:
1. Start the TPR Control Center.
2. Select
DEVICE – ThinPrint®
.
3. In the
Printer connection timeout
and
Job sending timeout
fields, enter the periods of time in seconds after which the
timeouts should take effect (0 s = off).
4. Click
Save
to confirm.
The settings are saved.
6.5
How to Get Status Information on the Printer
Connection
You can view the connection statuses of the embedded printer. In
order to get the connection status, you must configure a 'ping'
query.
Benefits and
Purpose
The connection status of the embedded printer is displayed in the
TPR Control Center:
The print status LED of the TPR also gives information about the
connection status; see: 'Quick Installation Guide'.
55) queries are deactivated, the LED does
not light up.
Connection Status
Description
Time out
No connection to the printer at present. A connection
was available at an earlier stage.
reachable
A connection to the printer is available at present.
unreachable
No connection to the printer so far.
Unknown
The connection status to the printer cannot be
determined.
