SEH ThinPrint, User Manual

Page: 45 / 130

Personal Printing Settings
TPR User Manual 45
the authentication to the TPR is done via a chip card. All users of the
TPR will get the same user-PIN. This PIN will be defined on the
Personal Printing server and must be saved identically to the TPR.
Configure a default user-PIN (e.g. 'SEH') on the Personal Printing
server for all users of the TPR. The user-PIN 'SEH' is preset on the TPR.
Proceed as follows:
1. Start the TPR Control Center.
2. Select
DEVICE - Personal Printing .
3. Tick Personal Printing .
4. Specify the Personal Printing parameters; see: Table 10

45.
5. Click Save to confirm.

The setting will be saved.
Table 10: Personal Printing Parameters
Parameters Description
Server Enables/disables the Personal Printing Server.
Server name Defines a Personal Printing server via the IP address or
the host name.
The host name can only be used if a DNS server was
configured beforehand.
Server port Defines the TCP port used by the TPR for
communicating with the Personal Printing server.
The port number 80 is preset. When using SSL, enter
443 as port number (

46).
User-PIN Defines the User-PIN.
The specified User-PIN and the User-PIN in the user
accounts of the Active Directory must be identical. The
preset user-PIN is 'SEH'.