SEH ThinPrint, User Manual

Page: 52 / 130

ThinPrint Settings
TPR User Manual 52
The support of the transfer methods depends on the printer. Consult
your printer manual for more information.
Proceed as follows:
1. Start the TPR Control Center.
2. Select
DEVICE – ThinPrint® printer .
3. Enter the printer parameters into the boxes; see: Table 12

52.
4. Select a transfer method for the printer.
5. Click
Save to confirm.

The settings are saved.
Table 12: Printer Parameters
Parameters Description
ID The ID clearly identifies the printer for the ThinPrint
server.
Printer Defines the printer name. The printer name is purely a
description and is used to distinguish the printers.
The printer can only use the ThinPrint AutoConnect
feature if a printer name was defined. If the printer
supports SNMP, the printer class is derived automatically
via SNMP. A freely definable description can be entered
at any time and will override any automatically derived
printer name.
Class Printers with compatible drivers can be arranged in one
class.
In addition to the defining of the printer name, you can
also define a printer class if you want to use the ThinPrint
AutoConnect feature. If the printer supports SNMP, the
class name is obtained automatically via SNMP. A freely
definable description can be entered at any time and will
override any automatically derived class name.
Driver Defines the printer driver for the ThinPrint® AutoConnect
feature.
Port Defines the port number for RAW/socket printing.
(Default = 9100)
Is used when selecting 'RAW' as the transfer method.