Appendix - Glossary
TPR User Manual
98
InterCon-NetTool
The software InterCon-NetTool has been developed by SEH
Computertechnik GmbH for the administration of SEH network
devices within a predefined network.
IP Address
The IP address is the unique address of each node in a network, i.e.
an IP address may occur only once on a local network. The system
administrator usually assigns the IP address. The address must be
saved in the TPR to make sure that it can be addressed within the
network.
Subnet Mask
With the help of the subnet mask, large networks can be split up
into subnetworks. In this case, the user IDs of the IP addresses are
assigned to the various subnetworks.
By default, the TPR is configured for the use without subnetworks. If
you wish to use a subnetwork, you can configure the relevant
parameter via the TPR Control Center or the InterCon-NetTool.
TPR Control Center
The TPR can be configured and monitored via the TPR Control
Center. The TPR Control Center is stored in the TPR and can be
displayed by means of a browser software (Internet Explorer, Mozilla
Firefox, Safari).
