Maintenance
TPR User Manual
87
8.3
How to Reset Parameters to their Default Values
(Reset)
It is possible to reset the parameters of the TPR to their default
values (factory settings). All previously configured parameter values
will be deleted in this process. Installed certificates will not be
deleted.
If you reset the parameters, the IP address of the TPR may change
and the connection to the TPR Control Center may be terminated.
You must reset the parameters, for example, if you have changed the
location of the TPR and if you want to use the TPR in a different
network. Before this change of location, you should reset the
parameters to the default settings to install the TPR in another
network.
Remove an attached USB flash drive before resetting the
parameters. If a parameters file is saved on the USB flash drive, the
TPR will - after the reset - automatically use the parameter values
saved on the USB flash drive (see:
By means of the status/reset button of the device you can reset the
parameters without entering the password.
What do you want
to do?
’Resetting the Parameters via the TPR Control Center’
’Resetting Parameters via the InterCon-NetTool’
’Resetting the parameters via the status/reset button’
Resetting the Parameters via the TPR Control Center
Proceed as follows:
1. Start the TPR Control Center.
2. Select
MAINTENANCE - Default settings
.
