Security
TPR User Manual
66
active until the TPR is rebooted. After restarting, the protection is no
longer effective.
The 'Test mode' option is activated by default. After a successful
test, you must deactivate the test mode so that access protection
remains permanently active.
Proceed as follows:
1. Start the TPR Control Center.
2. Select
SECURITY - TCP port access
.
3. Tick
Port access control
.
4. Select the desired protection in the
Security level
area.
5. In the
Exceptions
area, define the network elements which are
excluded from port blocking. Enter the IP or MAC addresses and
tick the options.
6. Make sure that the
Test mode
is enabled.
7. Click
Save & Restart
to confirm.
The settings are saved.
The port access control is activated until the device is restarted.
8. Check the port access and configurability of the TPR.
If the TPR can no longer be reached using the TPR Control Center,
restart the device; see:
9. Clear
Test mode
.
10. Click
Save & Restart
to confirm.
The settings are saved. The port access control is active. Access
to the ports is restricted.
