Maintenance
TPR User Manual
90
8.5
How to Restart the TPR
The TPR is rebooted automatically after parameter changes or
updates. If the TPR is in an undefined state it can also be rebooted
manually.
What do you want
to do?
’Rebooting the TPR via the TPR Control Center’
’Restarting the TPR via the InterCon-NetTool’
Rebooting the TPR via the TPR Control Center
Proceed as follows:
1. Start the TPR Control Center.
2. Select
MAINTENANCE - Restart
.
3. Click
Restart
.
The TPR will be restarted.
Restarting the TPR via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Highlight the TPR in the device list.
3. Select
Actions – Restart
from the menu bar.
The
Restart print server
dialog appears.
4. Click
Finish
.
The TPR will be restarted.
8.6
How to Print a Status or Service Page
You can print status or service pages to the connected network
printer. Both pages are available in English.
Status Page
A status page contains basic information of the TPR such as the
model type, hardware address, IP address, subnet mask, gateway, etc.
