Appendix - Parameter List
TPR User Manual
111
Table 28: Parameter List - ThinPrint Connection Service
Parameters
Value
Default
Description
conService
[Connection
Service]
on/off
off
Enables/disables the
ThinPrint Connection Service.
conServer
[Server name]
max. 255 characters
[., a–z, A–Z, 0–9]
[blank]
Defines the Connection
Service server via the IP
address or the host name.
(A host name can only be
used if a DNS server was
configured beforehand.)
tpgClientID
[Client ID]
0–99999
[1–5 characters; 0–9]
0
Defines the client ID as stored
in the database of the
ThinPrint® Connection
Service.
tpgAuthKey
[Authentication
key]
0–99999
[1–5 characters; 0–9]
0
Defines the authentication key
as stored in the database of
the Connection Service.
conPort
[Port]
1–65535
[1–5 characters; 0–9]
4001
Defines the TCP port used by
the TPR for communicating
with the Connection Service.
tpgKeepalive
[Keep alive]
1–60000
[1–5 characters; 0–9]
60
Defines the time interval (in
seconds) after which the
connection to the Connection
Service is refreshed.
Note: The value has to be
equal to or lower than the
'KeepAliveTO' value set on
the Connection Service
server.
tpgRetry
[Connection retry]
1–60000
[1–5 characters; 0–9]
120
Defines the time interval (in
seconds) after which a
connection retry is executed if
the Connection Service
cannot be reached.
