Network Settings
TPR User Manual
32
For SNMPv3 a name and password for the SNMP user have to be
defined. The user accounts used for this are those that are used for
the TPR Control Center access; see:
Requirements
Only for SNMPv3: The user accounts have been defined; see:
63.
Proceed as follows:
1. Start the TPR Control Center.
2. Select
NETWORK - SNMP
.
3. Configure the SNMP parameters; see: Table 5
4. Click
Save
to confirm.
The settings are saved.
Table 5: SNMP Parameters
Parameters
Description
SNMPv1
Enables/disables SNMPv1.
Read-only
Enables/disables the write protection for the community.
Community
SNMP community name
The SNMP community is a basic form of access
protection in which several participants with the same
access rights are grouped together.
SNMPv3
Enables/disables SNMPv3.
Hash
Defines the hash algorithm.
Access rights
Defines the access rights of the SNMP user.
Encryption
Defines the encryption method.