manualshive.com logo in svg

SEH ThinPrint, User Manual

Share
Download
SEH ThinPrint User Manual Download Page 86

Maintenance

TPR User Manual

86

Proceed as follows:

1. Start the TPR Control Center.
2. Select 

MAINTENANCE – USB device

.

3. Click 

Formatting

.

The USB flash drive will be formatted.

Saving the Parameter Values Automatically

Requirements

A USB flash drive has been connected to the TPR.

The USB flash drive has been formatted correctly; see: 



85.

Proceed as follows:

1. Start the TPR Control Center.
2. Select 

MAINTENANCE – USB device

.

3. Tick 

Parameter backup

.

4. Click 

Save

.

The settings are saved.

Loading the Parameter Values Automatically to a TPR

Requirements

The USB flash drive has been formatted correctly; see: 



85.

A parameter file exists on the USB flash drive; see ’Parameter 
Backup’  



85.

Proceed as follows:

1. Connect a USB flash drive to the USB port of the TPR.

Upon the next device restart, the parameter values in the file are 

automatically applied to the TPR.

Summary of Contents for ThinPrint



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands